英语翻译正常的步骤是这样的:首先在冷机的状态下把水加进机器里边,然后接通电源开始加热直到青色的蒸汽灯亮起.这时的压力就是机器的最大压力.

来源:学生作业帮助网 编辑:作业帮 时间:2024/04/29 12:59:51

英语翻译正常的步骤是这样的:首先在冷机的状态下把水加进机器里边,然后接通电源开始加热直到青色的蒸汽灯亮起.这时的压力就是机器的最大压力.
英语翻译
正常的步骤是这样的:首先在冷机的状态下把水加进机器里边,然后接通电源开始加热直到青色的蒸汽灯亮起.这时的压力就是机器的最大压力.

英语翻译正常的步骤是这样的:首先在冷机的状态下把水加进机器里边,然后接通电源开始加热直到青色的蒸汽灯亮起.这时的压力就是机器的最大压力.
Usually there are such steps:First,add water into the machine when the machine is not switched on.Next,turn on the machine and start heating until the green steam light is on,At this moment,the pressure of the machine is the maximum pressure.

Normal steps: firstly, keep it a cold machine, fill in water, then energize and heat the machine until the green steam indicator lamp tunrs on, and the pressure at this moment is the maximum pressure of this machine.