作业帮英语翻译倒角机数控转台改造项目 2012年3月公司原来一台倒角机的转台由于使用年限过长,精度下降,需要改造成数控转台.我负责相关部件的选型,包括plc、电机、驱动单元、位控模块等,编制pl
来源：学生作业帮助网 编辑：作业帮 时间：2024/05/06 07:37:48
英语翻译倒角机数控转台改造项目 2012年3月公司原来一台倒角机的转台由于使用年限过长,精度下降,需要改造成数控转台.我负责相关部件的选型,包括plc、电机、驱动单元、位控模块等,编制pl
英语翻译
倒角机数控转台改造项目 2012年3月
公司原来一台倒角机的转台由于使用年限过长,精度下降,需要改造成数控转台.我负责相关部件的选型,包括plc、电机、驱动单元、位控模块等,编制plc程序和硬件连接,并且负责转台的后期调试工作.
以上这些帮我翻一下就行
英语翻译倒角机数控转台改造项目 2012年3月公司原来一台倒角机的转台由于使用年限过长,精度下降,需要改造成数控转台.我负责相关部件的选型,包括plc、电机、驱动单元、位控模块等,编制pl
The company had a chamfering machine table due to the long useful life,the decline in accuracy,you need to be transformed into the NC rotary table.I am responsible for the selection of the relevant parts,plc,motor,drive unit,position control modules such as the preparation of the plc procedures and hardware connections,and is responsible for the late commissioning of the turntable.
Originally a chamfering machine revolving stage because use fixed number of year is too long, precision drop, need to transform into nc rotary table. I be responsible for selecting parts, including PL...
全部展开
Originally a chamfering machine revolving stage because use fixed number of year is too long, precision drop, need to transform into nc rotary table. I be responsible for selecting parts, including PLC, motor, drive unit, and a control module, handle PLC program and the hardware connection, and is responsible for the turntable commissioning work.
收起