英语翻译Take the tripod out of the pouch extend the legs And tighten with holder.Put the Tripod holder of the Main Tube on to the tripod platform and tighten it together with the Tripod securing screw,make sure the tube is place on right directio

来源:学生作业帮助网 编辑:作业帮 时间:2024/04/30 03:19:04

英语翻译Take the tripod out of the pouch extend the legs And tighten with holder.Put the Tripod holder of the Main Tube on to the tripod platform and tighten it together with the Tripod securing screw,make sure the tube is place on right directio
英语翻译
Take the tripod out of the pouch extend the legs And tighten with holder.Put the Tripod holder of the Main Tube on to the tripod platform and tighten it together with the Tripod securing screw,make sure the tube is place on right direction as shown in the diagtram.Push the View finder Tube into the Holder and insert the Holder into the main Body as shown in diagram.
Place the eyepiece with the lowest magnification(K25) in to the prism and tighten with the Screw.loos theMount adjust the direction where youi want then adiust the Focus wheel the get cheat and sharp viewing

英语翻译Take the tripod out of the pouch extend the legs And tighten with holder.Put the Tripod holder of the Main Tube on to the tripod platform and tighten it together with the Tripod securing screw,make sure the tube is place on right directio
把三脚架的腿袋延长并拧紧支架.将主管三脚架架在三脚架平台和加强它与三脚架固定螺丝,确保管放置在正确的方向,在diagtram所示.把取景器管插入支架并插入架为主体如图.与低倍目镜(K25)在地方的棱镜,用screw.loos themount调整的方向,你想再整合的重点轮得到欺骗和敏锐的观察

  把三脚架的腿袋延长并拧紧支架。将主管三脚架架在三脚架平台和加强它与三脚架固定螺丝,确保管放置在正确的方向,在diagtram所示。把取景器管插入支架并插入架为主体如图。
  以最低的地方目镜放大(K25)到棱镜和用screw.loos themount调整的方向,你想再整合的重点轮得到欺骗和敏锐的观察...

全部展开

  把三脚架的腿袋延长并拧紧支架。将主管三脚架架在三脚架平台和加强它与三脚架固定螺丝,确保管放置在正确的方向,在diagtram所示。把取景器管插入支架并插入架为主体如图。
  以最低的地方目镜放大(K25)到棱镜和用screw.loos themount调整的方向,你想再整合的重点轮得到欺骗和敏锐的观察

收起

把三脚架的腿和收紧眼袋扩展与持有人。把三脚架架主要管到三脚架平台和收紧它连同三脚架固定螺钉,确保管位置在正确的方向diagtram所示。推动取景管夹和插入夹到主体,如图。把目镜的放大(K25)最低的棱镜和收紧的螺钉。洗手间做调整方向,然后想要youi整合集中轮get欺骗和锋利的查看
你确定你没抄错?...

全部展开

把三脚架的腿和收紧眼袋扩展与持有人。把三脚架架主要管到三脚架平台和收紧它连同三脚架固定螺钉,确保管位置在正确的方向diagtram所示。推动取景管夹和插入夹到主体,如图。把目镜的放大(K25)最低的棱镜和收紧的螺钉。洗手间做调整方向,然后想要youi整合集中轮get欺骗和锋利的查看
你确定你没抄错?

收起